May 13, 2017

How to Make Injectable Steroids At Home?

While making injectables:

The number one thing you should be thinking of is practicing isolation of sterilized surfaces and items.
That is, if a piece is sterile, be sure that it doesn’t touch anything that is non-sterile. If your hands touch something that you haven’t sterilized, swap gloves. Think of it as a tattoo artist, a piercer, or your doc would. Cross-contamination can wreck the final product.

Work in an area or on a tray that you have wiped down with antiseptic solution before use and make sure you are working in an area with no air flow OR under a laminar flow hood(If you have access or know how to make one). If you are using pre-sterilized and sealed vials the airflow issue isn’t as important.

Sterilizing your instruments:

Other than your final work surface, the only things you should be worried about keeping sterile are as follows.

  1. Stoppers and vials.

I’ll go through a method for sterilizing both a bit later, if you aren’t using pre-sterilized/sealed vials. Most doing small batches should probably just purchase the sealed vials for ease of use.

  1. Your final filters
  2. Anything you may be using to transfer the sterilized solution from a larger container to a smaller one if applicable.

Several types of filtration systems and why you should consider using them:

  1.  Syringe filters

This is probably the most popular type for the small time home brewer.

I would use this method on single batches up to 100ml or for multiple batches for making a single cycle.

    2.   Sterilized, self contained vacuum filtration.

This would be for single batches in excess of 200ml.

They provides for simple and fast filtration of very large single item batches.You must practice better sterilization and isolation techniques with most brands.

    3.  Vacuum driven bottle top filtration systems.

    4.  Manual filtration systems.

    5.  Automatic vacuum filtration systems.

Bottle top filtration systems, manual filtration systems and Automatic vacuum filtration systems,would be used for

VERY large batches; >1L in quantity.

Same guidelines as above, only for use with 1L+ volume vacuum safe media bottles.For people wishing to use syringe filters, be sure they’re STERILE for your final filter. We prefer to prefilter with an unsterilized .45um filter and then do a final pass through a .22um or .2um filter. If you are using a sealed vial you’ll want to have one with a male luer lock on it. Some do not come with luer lock ends, but with luer slip. When using a vacuum filtration system of any kind you’ll need a source for the negative pressure. Most people use a hand pump of the variety you can find at any autoparts store, some are more advanced with a small electric pump. With vacuum systems you’ll want to keep your pressure just to the point where it filters smoothly, if you go too high you can and probably will crack the media bottle, thenyou’ve wasted a bit of money and need to refilter.

Solvents, co-solvents, and oils

I would recommend that you use all USP grade products, but if you don’t feel like shelling out the major cash to buy USP oils, food grade will work. You’ll find yourself going through filters much faster with food grade oils than with USP grade oil.I recommend grape seed, cotton seed, or sesame seed oils for your choices. Though just about anything you can find at the store will work. I wouldn’t recommend Wesson, but it will work, you won €™t be able to shoot that through a 25g needle though. Never compromise on your solvent choices, all recipes should have a minimum of 1% benzyl alcohol and 5% benzyl benzoate. All should be of USP-24 grade or higher.

Mr. T’s ‘super solvent’ will be sufficient alone if you have a particularly stubborn product you wish to make into an injectable solution. I’m not going to list a bunch of recipes,because i all have our personal preferences to that end.Generally, if you use the lowest possible concentrations of solvents you can to keep your solution from crashing,it’s all you need. If you feel more comfortable using 5% ba and 20%bb for everything then you can do that as well.

Sterilization of vials and stoppers:

  1. Clean your vials
  2. Wash with soap and distilled water, rinsing with distilled water
  3. Rinse a second time with an alcohol of your choosing. I prefer to use isopropyl. Acetone is also acceptable
  4. Dry and Heat your vials.
  5. Place them upside down on a baking sheet that has been properly wiped with an antiseptic.
  6. Preheat oven to 350*. Place vials in oven and let set for about 30mins, allow the vials to cool to room temp and then repeat the process.
  7. Soak stoppers in a hydrogen peroxide solution for a minimum of 10 mins.

All other items you use that should be sterilized come from the factory sterilized; syringes, needles, and filters.

Shopping list for making injectable items:

  1. 1-2 gallons of distilled water.
  2. Anti-bacterial dish soap
  3. Acetone or isopropyl alcohol >90% purity and hydrogen peroxide
  4. Benzyl benzoate

  1. Benzyl alcohol

  1. USP or food grade seed oil of your choice

  1. 3ml syringes, 10ml syringes, 20-60ml syringes

  1. 18g and 3cc Syringe with 25-Guage x 1 1/2″

  1. 20 ml Clear Sealed Sterile Glass Vial or unsealed vials

  1. If you use unsealed vials you’ll need stoppers and caps

11.  Syringe Filter and Coffee Filters

12.  Your hormone of choice.

13.  Beakers and glass bars for mixing solutions

  1. Sealed Sterile Glass VialCrimpers (Vial Pliers)

Want to Be A Steroid Brand Owner or Lab Owner?

We will make your dream come true. We are offering more than just steroid oil conversions or suspensions, but also the full guide and those mentioned and other materials to make it come true that let you become a brand or lab owner. For more details, we can discuss it after we build some trust. And I promise that it will be easier than you can imagine with our guide.

The prices for labels, empty vials and custom made flip off caps are various from sizes, quantities, materials being used and difficulty levels, etc. If you want to the prices, we do need the very specified information as much as possible about specified width and length, how many, what materials or quality, how many colors, etc. We’re not able to offer prices without specified information.

Steroid Knowledges , , , ,
About lynn518

Leave a Reply

Your email address will not be published. Required fields are marked *